PR electronics PR 5300 and PR 5400 are temperature transmitters product series developed for sensor head mounting. The range includes 2-wire transmitters with traditional mA output signal, with HART® frequency signal and with digital signals of fieldbuses.
Detailed product data and safety notes for each type by clicking the type number.
5300 series, 2-wire transmitters:
5400 series, 2-wire transmitters:
5800 series, compact 2-wire transmitters:
Check out all our temperature transmitters!
is a small, 1 channel transmitter for sensor head installation, input can be: RTD, TC, linear resistance or mV. HART® communication with HART®5 protocol.
is a small, 1 channel transmitter for sensor head installation, input can be: RTD, TC, linear resistance or mV. HART® communication by user selectable HART®5 or HART®7 protocols. When using PReset software, version 6.04 or later should be used.
is a small transmitter with single or true dual inputs with sensor redundancy and drift detection for sensor head installation, input can be: RTD, TC, potentiometer, linear resistance or bipolar mV. HART® communication with HART®7 protocol. Full assessment to IEC61508:2010 for use in SIL 2/3 applications. When using PReset software, version 8.02.1006 or later should be used.
HART® files:
HART® bus files - DD & AMS, EDD and DTM - can be downloaded from page: prelectronics.com > Download > Software > Files for HART and bus communication
is a small, 1 channel, FISCO-certified digital transmitter for sensor head installation. Input can be RTD or TC sensor.
Profibus® files - GSD and PDM - can be downloaded from page:
www.prelectronics.com > Download > Software > Files for bus communication
You can use the same transmitter also in FOUNDATION™ Fieldbus H1 process bus. Transmitter detects automatically which bus it is connected to (patented AutoSwitch function), and adapts its features according to that bus.
is a small, 1 channel, FISCO-certified digital transmitter for sensor head installation. Input can be: RTD or TC sensor.
LAS function block: transmitter can be programmed to take over the bus segment communication control if connection to master is lost.
PID function block: process control can be decentralized down to transmitter level.
H1 bus files - DD and DTM - can be downloaded from page: prelectronics.com > Download > Software > Files for bus communication
You can use the same transmitter also in Profibus® PA process bus. Transmitter detects automatically which bus it is connected to (patented AutoSwitch function), and adapts its features according to that bus.
